User Manual Q&AAnswer
Apr 10, 2025 - 05:34 AM
Installing the Sharkoon VGCK 4.0 Vertical Graphics Card Kit 4.0 is a simple process. Here are the steps to follow:
1. Start by connecting the PCIe 4.0 riser cable to your motherboard. Locate the appropriate PCIe slot on your motherboard and insert the riser cable securely.
2. Next, install the mount into your PC case. The specific installation method may vary depending on your case model, so refer to the user manual of your case for detailed instructions. Generally, you will need to remove some screws or brackets from the case, position the mount correctly, and secure it in place.
3. Once the mount is installed, you can attach your graphics card to it. Align the graphics card with the mount and insert it into the PCIe slot on the riser cable. Make sure it is firmly seated and secured.
4. Finally, double-check all connections and ensure that the graphics card is properly installed. Close the PC case and power on your system.
Please note that the Sharkoon VGCK 4.0 Vertical Graphics Card Kit 4.0 is compatible with the following cases: ELITE SHARK CA200G, ELITE SHARK CA200M, ELITE SHARK CA300T, ELITE SHARK CA300H, ELITE SHARK CA700, and TG7M RGB. Make sure your case is one of these models before purchasing the kit.
For more detailed instructions and illustrations, refer to the user guide provided with the Sharkoon VGCK 4.0 Vertical Graphics Card Kit 4.0.
Add New Comment