User Manual Q&AAnswer
Apr 10, 2025 - 05:16 AM
To connect the yeedi vac 2 pro Robot Vacuum to your home Wi-Fi network, please follow these steps:
1. Make sure that your mobile phone is connected to a Wi-Fi network and the 2.4GHz band wireless signal is enabled on your router.
2. Ensure that the Wi-Fi indicator light on the robot vacuum is slowly flashing, indicating that it is disconnected from Wi-Fi or waiting for a Wi-Fi connection.
3. Turn on the power switch of the robot vacuum and press the RESET button for 3 seconds. The robot vacuum is ready for network setup when it plays a musical tune and its Wi-Fi indicator light flashes slowly.
4. Open the yeedi app on your mobile phone and follow the instructions to add a new device. Make sure to enter the correct home Wi-Fi username and password when prompted.
5. Ensure that the robot vacuum is within range of your home Wi-Fi signal. If it is too far away, move it closer to the Wi-Fi router.
6. If the network setup process started before the robot vacuum was ready, turn off the power switch, press the RESET button for 3 seconds, and then repeat the network setup process.
If you have followed these steps and the robot vacuum is still not connecting to your Wi-Fi network, please refer to the Troubleshooting > Wi-Fi Connection section in the user manual for further assistance.
Add New Comment