User Manual Q&AAnswer
Apr 10, 2025 - 05:13 AM
To assemble the ROXTONE LX3F Low Profile Rotatable XLR Female, please follow the steps below:
1. Remove about 15mm of the cable jacket.
2. Fray and twist the shielding tight. Remove about 4mm of the lead jacket at the end.
3. Put the heat-shrink tube over the shielding, leaving the 4mm tip exposed.
4. Solder the leads into the insert solder cups and heat the shrink tube. Install the mini-zip tie 4mm from the jacket section and tighten, then cut the excess part.
5. Depending on different application scenarios, the product can be assembled in two modes: Mode A or Mode B, based on the orientation of the cable exit. Refer to the provided figure for reference.
6. Depending on your usage needs, the back cover can be turned within 100° in the same direction to align the cable exit to your preferred position.
For disassembly, follow these steps:
1. Remove the color ring.
2. Remove the shell.
Please refer to the provided assembly and disassembly instructions for a more detailed visual guide.
Add New Comment