User Manual Q&AAnswer
Apr 10, 2025 - 05:06 AM
To mount the EUFAB 17520 Car Mobile Phone Holder in your car, follow these steps:
1. Before mounting, check whether the smartphone holder is suitable for the selected mounting point, such as the dashboard, sun visor, or rear-view mirror.
2. Open the spring clamp located at position 4 in the overview image provided in the manual.
3. Place the smartphone holder onto the dashboard of your vehicle or proceed as follows for mounting to the sun visor or rear-view mirror.
4. Squeeze the locks located at position 2 in the overview image together. This will move the holding clamps (position 1 in the overview) apart.
5. Place your smartphone between the holding clamps.
6. Release the lock, and your smartphone will now be affixed in the holder.
7. The holder can be turned so that the display is either upright or crosswise. You can set the tilt angle with the holding arm located at position 3 in the overview image.
Note: If your car has leather-coated or foamed surfaces, it is recommended to remove the smartphone holder whenever it is not needed to avoid the risk of permanent dents, especially in high temperatures.
For more detailed instructions and illustrations, please refer to the EUFAB 17520 Car Mobile Phone Holder User Manual.
Add New Comment