User Manual Q&AAnswer
Apr 10, 2025 - 04:25 AM
To charge your smartphone using the hama FC-10C Flex Wireless Car Charger, please follow these steps:
1. Fasten the wireless car charger over the enclosed grating holder to your vehicle's grating.
2. Connect the enclosed USB-A to USB-C connector cable to the USB-C input on the inductive charger and the enclosed car adapter for power supply.
3. When the power supply is active, the status LED will light up red.
4. Use the adjustment lever to set the holding jaws to the size of your smartphone. You can move the controller slightly by pressing it to release the locking mechanism.
5. Place the holding jaws in the maximum opening position and then place your smartphone in the charger.
6. Slide the holding jaws together using the adjustment lever until the smartphone sits firmly in the holder. Release the lever to lock the position.
7. Now, place your device with its rear on the wireless charger.
8. The charging process will begin as soon as an effective induction field has been established. The status LED will start to flash red, indicating the charging process.
9. The charging process will end automatically once your device's battery is fully charged. The status LED will light up solid green.
10. Remove your device from the wireless charger and disconnect the wireless charger from the power supply.
Note: Ensure that your device is compatible with induction charging technology and remove any metal or magnetic objects from the charger to avoid damage.
Add New Comment