User Manual Q&AAnswer
Apr 10, 2025 - 04:13 AM
To set the PUSH TO SET (PTS) mode on the COMMAND ACCESS PD10-M-CVR Motorized Storefront Exit Device, follow these steps:
Step 1: To enter PTS mode, depress the MM5 button and apply power to the device. The device will emit 1 SHORT beep, indicating that it is now in PTS mode.
Step 2: While depressing the push pad, apply power to the device, such as presenting the credential to the reader.
Step 3: Continue to keep the pad depressed. The device will emit 1 LONG beep. After the beep has stopped, release the pad. The adjustment is now complete. Test the new location. If it is not to your liking, you can repeat the 3 steps.
Please note that it is important to set the PTS mode before finishing the installation of the device.
Add New Comment