User Manual Q&AAnswer
Apr 10, 2025 - 04:05 AM
Here are the installation instructions for the Eviva 2483VA-36-201 36-IN Vanity with Top:
1. Remove the top (B) from the vanity (A) and place it face down on a scratch-free surface.
2. Clean the area where the vanity will be permanently located.
3. With the help of another person, carefully place the vanity against the wall in its final location.
4. Use the pre-assembled levelers on the bottom of each leg of the vanity to level it. Twisting the levelers counterclockwise will raise the height of the vanity, and twisting them clockwise will lower it.
5. Once the vanity is level, drill a hole through the vanity mounting area and into the wall studs. Secure the vanity to the wall studs using appropriate mounting hardware.
6. Apply stain-free silicone caulk to the top edge of the vanity.
7. With the help of another person, gently lower the top onto the vanity. Wipe away any excess caulk and wait for it to dry.
8. Place the sink template on the top, aligning the hole in the cardboard with the hole in the stone top.
9. Apply a thin bead of silicone caulk onto the stone top close to the edge of the sink cutout.
10. Gently lower the sink onto the stone top using even pressure. Make sure the sink overflow hole is at the front of the wood cabinet.
11. Apply silicone caulk to the unpolished side and bottom of the backsplash. Position the backsplash on top of the vanity and against the wall. Clean any excess caulk before allowing it to dry.
12. If your plumbing comes out of the back wall, insert the floor plumbing cutout lid to close the hole and increase storage space.
13. Insert shelf pins at the desired height and place the shelf on top of the pins.
14. Adjust the doors if needed by loosening screws on the hinges and adjusting the door position. Retighten the screws once adjusted.
15. Install the desired faucet and drain assemblies per the manufacturer's instructions.
16. Follow the care and maintenance instructions provided in the manual to keep the vanity in good condition.
Please note that these are general instructions, and it's important to refer to the specific manual for your model for accurate installation steps.
Add New Comment