User Manual Q&AAnswer
Apr 10, 2025 - 03:59 AM
To attach the MC ProPlus Wrist Disarticulation Hand to your forearm, follow these steps:
1. Before attaching the hand, make sure the switch on the palmar side of the hand, located at the base of the thumb, is pushed completely to the back of the hand (the OFF position).
2. Insert the quick disconnect wrist on the hand into the wrist on your forearm. Push it in firmly and rotate the hand until you hear an audible click. It is recommended to rotate the hand in both directions several clicks and then try to pull the hand off to ensure it is securely attached.
3. Once the hand is attached, push the switch on the back of the hand toward the palmar surface to the second (middle) position. This turns the hand ON and makes it ready for use.
4. To disconnect the hand, first turn it OFF by pushing the switch all the way to the back of the hand. Then, rotate it in either direction until you feel a slightly more difficult click. Overcoming this click will disconnect the hand from the forearm, allowing interchangeability with another terminal device.
Please refer to the MC ProPlus Wrist Disarticulation Hand User Manual for more detailed instructions and illustrations.
Add New Comment