User Manual Q&AAnswer
Apr 10, 2025 - 03:38 AM
To assemble the ARDESTO OFH-E09X2 Oil Filled Radiator, follow these steps:
1. Place the radiator body upside-down on a stable surface.
2. xxxx off the wing nuts from the U-shaped bolt provided and attach the U-shaped bolt to the U-facing flange between the first and second fins (near the front cover).
3. Insert the threaded ends of the U bolt into the holes on the wheel mounting plate to attach the wheel mounting plate to the radiator body.
4. xxxx the wing nuts back onto the U bolt and fasten them properly. Do not over tighten, as it may damage the radiator flange.
5. xxxx off the spherical nut from the castor, align the shaft with the hole of the castor mounting plate, insert it, and xxxx on the spherical nut.
6. Repeat steps 2-5 on the rear of the radiator for mounting the rear wheels. Note that the rear wheels must be mounted between the end two fins.
Please refer to the assembly instructions in the manual for visual illustrations and additional details.
Note: It is important to assemble the feet before operating the heater. Operating the heater without the feet attached or in any other position could create a hazardous situation.
Add New Comment