How to charge Rechargeable Battery for LUXOR Adjustable Height Presentation Workstation? (LUXOR Adjustable Height Presentation Workstation Instructions Manual)

Answer

manuals.plus

Apr 10, 2025 - 03:32 AM


To charge the Rechargeable Battery for the LUXOR PS3945 Adjustable Height Presentation Workstation, follow these steps:

1. Plug the male end of the power cord into the Single Battery Charger.
2. Plug the power cord into an available AC wall outlet.
3. Connect the Rechargeable Battery to the Single Battery Charger.
   - When fully connected, the Rechargeable Battery indicator lights will blink to show the charging status.
   - The blinking pattern of the indicator lights indicates the charging progress:
     - 1st dot blinking: 0 to 24% charged
     - 2nd dot blinking, 1st dot solid: 25 to 49% charged
     - 3rd dot blinking, 1st & 2nd dot solid: 50 to 74% charged
     - 4th dot blinking, 1st, 2nd, & 3rd dot solid: 75 to 99% charged
   - Note: The batteries will ship only partially charged and must be fully charged before first use.
4. Allow the Rechargeable Battery to fully charge, which typically takes about two (2) hours.
5. When all four indicator lights illuminate solid, the Rechargeable Battery is fully charged and ready for use.

If the indicator lights are not illuminating, please ensure that the Single Battery Charger is fully plugged in and connected to the Battery. If the issue persists, please contact customer service for further assistance.

Note: It is recommended to fully charge the Battery before first use and to fully charge it at least once every three (3) months to maintain good battery health. Additionally, keep the Battery away from spills and moisture, avoid storing it in high-humidity environments, and dispose of damaged or end-of-life Batteries according to local laws and regulations.