How do I install the HIKVISION In-Ceiling Mount Bracket for Dome Camera? (Hikvision In-Ceiling Mount Bracket Dome Camera Owner's Manual)

Answer

manuals.plus

Apr 10, 2025 - 02:45 AM


To install the HIKVISION DS-1249ZJ In-Ceiling Mount Bracket for Dome Camera, please follow these steps:

1. Ensure that you have a flat wall capable of supporting over 3 times the total weight of the camera and the mount.
2. Prepare the necessary tools for installation, including a drill, screws, and a waterproof rubber seal (for outdoor application).
3. Mark the desired location on the ceiling where you want to install the bracket.
4. Drill holes into the ceiling at the marked locations, ensuring that they are aligned with the mounting holes on the bracket.
5. Insert the screws into the drilled holes, leaving them partially protruding from the ceiling.
6. Attach the bracket to the ceiling by aligning the mounting holes on the bracket with the screws.
7. Tighten the screws to secure the bracket in place.
8. If installing the bracket outdoors, apply a waterproof rubber seal between the bracket and the ceiling to prevent water ingress.
9. Once the bracket is securely installed, you can mount the dome camera onto the bracket using the appropriate mounting hardware provided with the camera.

Please note that the maximum load capacity of the DS-1249ZJ bracket is 4.5KG. Ensure that the weight of your camera does not exceed this limit to avoid any potential damage or instability. For further information or specific instructions, please refer to the owner's manual provided with the product.