User Manual Q&AAnswer
Apr 10, 2025 - 02:36 AM
To change the lighting effects on the Sharkoon RGB Pure Writer TKL keyboard, follow these steps:
1. Press and hold the Fn key.
2. Press the ESC key to enter the lighting profile setup mode. The F1 to F4 keys will start blinking.
3. Select a lighting profile by pressing the corresponding F-key.
4. Press the keys that you want to be permanently illuminated in the selected lighting profile.
5. To change the illumination color of a key, press the key several times until the desired color is achieved. You can choose from red, green, yellow, blue, turquoise, pink, and white.
6. To turn off the illumination on a particular key, cycle through all the colors until the lighting goes out.
7. While still holding the Fn key, press the ESC key to save the selected key illumination in the previously selected lighting profile key.
Please note that the ability to change the current color is only possible while using the "Permanent" lighting effect. The "Permanent" lighting effect has seven preset colors (red, green, yellow, blue, turquoise, pink, and white), which can be accessed and cycled through by repeatedly pressing the Fn + End key combination. The original color is overridden.
For more detailed instructions and information, please refer to the Sharkoon RGB Pure Writer TKL User Manual.
Add New Comment