User Manual Q&AAnswer
Apr 10, 2025 - 02:26 AM
To install and mount the Paul Neuhaus 15563 LED Panel, please follow the instructions provided in the manual:
1. Determine the desired location for mounting the LED panel. Ensure that the surface is suitable for mounting and can support the weight of the panel.
2. Turn off the power supply before starting the installation process.
3. Remove the protective film from the back of the LED panel.
4. Attach the mounting brackets to the back of the panel using the provided screws. Make sure the brackets are securely fastened.
5. Mark the desired position on the wall or ceiling where you want to mount the panel. Use a level to ensure the panel will be installed straight.
6. Drill holes into the marked positions on the wall or ceiling according to the dimensions specified in the manual.
7. Insert the provided wall plugs into the drilled holes.
8. Align the mounting brackets on the back of the LED panel with the drilled holes on the wall or ceiling.
9. Securely attach the panel to the wall or ceiling using the provided screws. Make sure the panel is firmly mounted.
10. Connect the LED panel to the power supply according to the electrical wiring instructions provided in the manual.
11. Turn on the power supply and test the LED panel to ensure it is functioning properly.
Please note that these instructions are a general guideline. It is always recommended to refer to the specific instructions provided in the Paul Neuhaus 15563 LED Panel Instruction Manual for accurate and detailed installation steps.
Add New Comment