How do I install the Paul Neuhaus 15394 LED Pendant Light? (Paul Neuhaus LED Pendant Light Instruction Manual)

Answer

manuals.plus

Apr 10, 2025 - 02:13 AM

Installation of the Paul Neuhaus 15394 LED Pendant Light is a straightforward process. Here is a step-by-step guide:

1. Before starting the installation, ensure that the power supply to the light fixture is switched off.

2. Identify a suitable location for the pendant light. It should be securely mounted to a ceiling or overhead structure capable of supporting the weight of the fixture.

3. Remove the packaging and carefully unpack the pendant light, ensuring that all components are present and undamaged.

4. Connect the electrical wires of the pendant light to the corresponding wires in the ceiling. It is recommended to consult a qualified electrician for this step if you are unsure about electrical connections.

5. Once the electrical connections are made, attach the pendant light to the ceiling using the provided mounting hardware. Follow the instructions in the manual for the specific installation method applicable to your ceiling type (e.g., screws, hooks, etc.).

6. After securely mounting the pendant light, restore the power supply and test the functionality of the light. If the light does not turn on, double-check the electrical connections and consult the troubleshooting section of the manual.

7. Adjust the height of the pendant light if necessary. Some models may allow for height adjustment by adjusting the length of the suspension cables or rods. Refer to the manual for specific instructions on adjusting the height.

8. Once the installation is complete, ensure that all components are properly secured and that the pendant light is hanging straight and level.

For any further assistance or clarification, you can contact LeuchtenDirekt GmbH, the manufacturer, through their customer service channels provided in the manual.