User Manual Q&AAnswer
Apr 10, 2025 - 02:04 AM
To install the BubblyNet T7 Touchscreen, follow these steps:
1. Use the appropriate cutting tool to make a cut-out in the wall according to the dimensions provided in the cutout table in the manual. The cutout can be in landscape or portrait mode. Make sure to pull out the USB-C through the cutout.
2. Connect the USB-C cable to the touchscreen. The USB-C cable is for power and is necessary for the operation of the device.
3. Pull the springs back to prepare for installation.
4. Insert the touchscreen into the wall, ensuring that all cables are inside the wall.
5. Flip on the breaker to the screen. It will automatically start the set-up routine.
Please note that the installation of the BubblyNet T7 Touchscreen should be carried out by a qualified electrician in accordance with the National Electrical Code and local and federal specifications. It is important to disconnect power at the electrical panel before servicing the device.
For additional information and specific wiring details, refer to the wiring diagram provided in the manual.
Remember to retain these instructions for future maintenance reference. If you have any further questions or concerns, you can contact BubblyNet directly at their provided contact information.
Add New Comment