How do I install the sygonix Installable Thermostat? (sygonix Installable Thermostat Instruction Manual)

Answer

manuals.plus

Apr 10, 2025 - 02:02 AM

To install the sygonix 2522212 Installable Thermostat, please follow these steps:

1. Ensure that the thermostat is only installed by a qualified technician (e.g., electrician) who is familiar with the relevant regulations (e.g., VDE, German electrical wiring regulations).

2. Make sure to disconnect the mains plug from the mains socket or switch off the corresponding circuit breakers and appliance leakage circuit interrupter if the device is permanently connected to the mains voltage.

3. Mount and operate the thermostat only in enclosed housings, with only the shaft for the dial leading outside. The provided dial (or another suitable dial) must be mounted on the shaft.

4. Maintain the specified safety distance between live components carrying mains voltage and exposed parts of the enclosure.

5. Ensure that the device in which the thermostat is installed is separated from the mains voltage and all other cables/leads.

6. Avoid kinking, pinching, or damaging the capillary tube and sensor when shifting or attaching them. Do not shorten or cut off the capillary tube or sensor, and do not turn any screws through the sensor tip.

7. Once the thermostat is properly installed, it can be connected to the heating device using the three connections for cable lugs. Refer to the overprint on the underside of the thermostat for guidance.

8. If you are unsure about the installation or connection process, it is recommended to consult a specialist or qualified technician.

Please note that the above instructions are a summary. For detailed installation instructions and safety precautions, refer to the sygonix 2522212 Installable Thermostat Instruction Manual.