User Manual Q&AAnswer
Apr 10, 2025 - 01:49 AM
To install the LeuchtenDirekt 998393 Quarter Ritus light fixture, please follow the steps below:
1. Ensure that the power supply is turned off before starting the installation process.
2. Choose a suitable location for the light fixture. Make sure the mounting surface is sturdy and can support the weight of the fixture.
3. Remove the mounting plate from the fixture by unscrewing the screws located on the sides of the fixture.
4. Hold the mounting plate against the desired location on the wall or ceiling and mark the positions for the mounting holes.
5. Drill the necessary holes for the mounting screws according to the marked positions.
6. Insert the provided wall plugs into the drilled holes.
7. Align the mounting plate with the drilled holes and secure it to the wall or ceiling using the provided screws.
8. Connect the electrical wires from the power supply to the corresponding wires on the fixture. Ensure that the connections are secure and insulated properly.
9. Attach the light fixture to the mounting plate by aligning the holes on the fixture with the screws on the mounting plate. Slide the fixture downwards until it locks into place.
10. Turn on the power supply and test the light fixture to ensure it is functioning correctly.
Please note that the above instructions are a general guideline for installing the LeuchtenDirekt 998393 Quarter Ritus light fixture. For more specific instructions or if you encounter any difficulties during the installation process, it is recommended to refer to the instruction manual provided with the product or contact Leuchten Direkt GmbH's customer service for further assistance.
Add New Comment