User Manual Q&AAnswer
Apr 10, 2025 - 01:25 AM
To charge the battery for the Autel EVO Lite Robotics Drone, please follow these steps:
1. Ensure that the charger is not damaged.
2. Disconnect the charger from the aircraft battery and power supply when not in use.
3. Wait for the battery to cool to room temperature before charging. If you connect the battery to the charger immediately after a flight, the over-temperature protection function may be activated, preventing the battery from charging until it has cooled completely.
4. Connect the charger to a power source.
5. Connect the charger to the aircraft battery.
6. The charging process will begin automatically. The LED indicator on the charger will show the charging status.
7. It takes up to 90 minutes to fully charge the aircraft battery, but the charging time may vary depending on the remaining power.
Please note that using damaged battery chargers or not following the charging guidelines may result in hazards or damage to the battery. It is important to strictly follow the instructions provided in the user manual for safe and proper charging of the battery.
Add New Comment