User Manual Q&AAnswer
Apr 10, 2025 - 01:24 AM
To mount the Speco Technologies HT5940TM Intense IR Dome Camera on a wall or ceiling, please follow the instructions below:
1. Determine the desired mounting location for the camera.
2. Use the provided mounting template to mark the xxxx hole locations on the wall or ceiling.
3. Drill holes at the marked locations using an appropriate drill bit.
4. Insert the provided wall anchors into the drilled holes.
5. Align the camera's mounting bracket with the wall anchors and secure it using the provided screws.
6. Adjust the camera's position and tighten the screws to ensure a secure mount.
7. Connect the necessary cables to the camera.
8. If using the Chameleon Cover™, snap it onto the camera and paint it to match your desired decor.
9. Connect the camera to a power source and ensure it is receiving power.
10. Adjust the camera's angle and focus as needed.
For more detailed instructions and illustrations, please refer to the Speco Technologies HT5940TM Intense IR Dome Camera Wall/Ceiling Mount Instruction Manual.
Add New Comment