User Manual Q&AAnswer
Apr 10, 2025 - 01:23 AM
To set up the Jacobs Ladder machine for home use, follow these steps:
1. Unpack the ladder and remove the packing materials from the base and upright/console assembly.
2. Unbolt the ladder from the pallet and roll it onto the floor. Be sure to get the appropriate number of people to help you move the ladder to its final location as it is very heavy.
3. Once in its final position, use a 5/8" wrench to remove the two nuts/bolts located at the bottom base of the ladder, holding the transport wheels in place. Keep both bolts and nuts, as they will be reused. Remove the transport wheels and store them for future use.
4. Install the ladder support feet in the location where the wheels were removed. Two 3/8" bolts should be installed through the main base into each of the two support feet. Each foot should be located in the same center section where the wheel was previously removed. A 3/8" nut should be installed on the end of the bolt as it projects through the opposite mounting wall of the main base. Tighten each nut to ensure no movement occurs in the feet.
5. If you need to move the ladder, ask for assistance. Transport wheels can be reinstalled to assist in the relocation of the ladder. Roll the ladder on its transport wheels to its new location by lifting the rear end of the unit. Reminder: The ladder should never be moved with one person.
Please refer to the assembly instructions in the owner's manual for more detailed information and diagrams.
Note: It is important to follow all safety precautions and guidelines provided in the owner's manual during the setup process.
Add New Comment