User Manual Q&AAnswer
Apr 10, 2025 - 01:08 AM
To charge the Autel Smart Controller V3, follow these steps:
1. Use the charger provided by Autel Robotics. Do not use any other charger or modify the battery assembly.
2. Connect the charger to a power source.
3. Plug the charger into the USB Type-C port on the Smart Controller.
4. The LED indicator on the Smart Controller will blink while charging.
5. Once the battery is fully charged, the LED indicator will stop blinking.
Note: It is recommended to fully charge the Smart Controller every three months when not in use. Additionally, do not block the vent of the Smart Controller to prevent overheating and diminished performance.
For more information and safety guidelines, please refer to the Autel 102001507 Smart Controller V3 User Guide.
Add New Comment