User Manual Q&AAnswer
Apr 10, 2025 - 01:04 AM
To measure the surface temperature using the CONDTROL Maxwell 4 Infrared Thermometer, follow these steps:
1. Switch on the device by short pulling the trigger.
2. Aim the device at the object whose surface temperature you want to measure.
3. Pull the trigger and keep it pulled to enter continuous measurement mode.
4. The measurement results will appear on the display in real-time mode.
5. Release the trigger to hold the last measured values on the display.
Note: The device has a laser pointer that can be activated to help you aim at the object accurately. However, it is important not to stare into the laser beam or point it at people or animals without a need.
For more detailed instructions and safety information, please refer to the CONDTROL Maxwell 4 Infrared Thermometer User Manual.
Add New Comment