User Manual Q&AAnswer
Apr 10, 2025 - 01:03 AM
To install the stainless steel handle on the newair NCR032SS00 beverage fridge, follow these steps:
1. Remove the rubber gasket from the right side of the inside of the door. You only need to remove the side that covers the openings for the screws.
2. Remove the screws from the included bag. Feed the screws through the holes from the inside until they poke through to the outside front of the door frame.
3. Align the handle with the two screws, then tighten the screws into the handle using a screwdriver until the handle is both flush and secured tightly against the door frame. Be careful not to over-tighten the screws, as it may cause damage to the door frame.
Please refer to the "INSTALLING THE STAINLESS STEEL HANDLE" section in the owner's manual for more detailed instructions and illustrations.
Add New Comment