User Manual Q&AAnswer
Apr 10, 2025 - 01:02 AM
To charge the RingConn BOR-01-6 Smart Health Monitoring Ring, follow these steps:
1. Connect the Type-C cable to the Smart Charging Case.
2. Plug the other end of the cable into a USB port on your computer or phone.
3. Place the Smart Health Monitoring Ring inside the Smart Charging Case.
4. The LED on the Charging Case will show a solid white light, indicating that the ring is charging.
5. It takes approximately 90 minutes for the ring to fully charge.
6. Once the ring is fully charged, the LED on the Charging Case will turn off or show a solid white light if the Charging Case battery level is above 40%.
7. You can now remove the ring from the Charging Case and use it.
Please note that it is important not to charge the ring when it is wet or not completely dry. Also, do not use corrosive cleaning agents to clean the product, as this may damage it.
Add New Comment