How do I mount the SW-MOTECH SysBag 30 Bag System on my EVO carrier? (SW-MOTECH SysBag 30 Bag System Instruction Manual)

Answer

manuals.plus

Apr 10, 2025 - 12:58 AM

To mount the SW-MOTECH BC.SYS.08.722.20000B SysBag 30 Bag System on your EVO carrier, please follow the steps below:

1. Remove the seat and the original screws and washers from the passenger grips.
2. Attach the mounting brackets (KFT.08.722.001 IL/RI) on both sides of the vehicle, as shown in the drawing. Use medium-strength liquid thread locker and do not fully tighten the screws yet.
3. Remove the original screws from the upper mounting points and attach the mounting brackets (KFT.08.722.003) on both sides of the vehicle. Again, use medium-strength liquid thread locker and do not fully tighten the screws yet.
4. Attach the mounting brackets (KFT.08.722.002) behind the passenger footrest mounts on both sides of the vehicle. Use medium-strength liquid thread locker and do not fully tighten the screws yet.
5. For vehicles until the year of manufacture 2016, remove the original license plate mounting bracket and attach the crossbar (KFT.08.722.004L/R) with the license plate mounting bracket on the mudguard, as shown in the drawing. Use medium-strength liquid thread locker and do not fully tighten the screws yet. For vehicles manufactured starting from 2017, attach the crossbar (KFT.08.722.006) as shown in the detail drawing.
6. Connect the side carriers (KFT.08.722.961.01 and KFT.08.722.962.01) to the mounting brackets and crossbar with the quick-lock fasteners (CAM.2312S21-12AHNV) and lock washers (CAM.2312S10-1BP). Make sure the parts are aligned without tension and then fully tighten all screws as specified in the parts list.
7. Repeat the above steps for the other side of the vehicle to mount the SysBag 30 Bag System on your EVO carrier.

Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed information and illustrations.