User Manual Q&AAnswer
Apr 10, 2025 - 12:56 AM
Mounting the SW-MOTECH BC.SYS.06.435.20000B SysBag 30 Bag System on your motorcycle requires careful attention to detail and following the provided instructions. Here are the step-by-step instructions for mounting the SysBag 30 Bag System:
1. Preparation:
- Read the mounting instructions carefully and ensure that all parts listed in the manual are included.
- Park your motorcycle in a safe and stable position.
- Turn off the engine and remove the ignition key.
- Allow the motor/exhaust to cool off if necessary.
- Disconnect the vehicle battery when working on the electrical system.
- Gather appropriate tools and consider having another person to assist you.
2. Mounting:
- All parts and connections removed from the motorcycle must be reinstalled according to the vehicle manufacturer's specifications or replaced with parts provided by SW-MOTECH.
- Secure all threads, unless otherwise specified, with medium-strength liquid thread locker.
- Refer to the specific mounting instructions for your type of side carrier (EVO side carrier, PRO side carrier, STEEL-RACK, ADVENTURE RACK, etc.) and follow the steps provided.
- Attach the adapter plate for SysBag 30 to the side carrier or rack using the specified screws and tighten them to the torque specified in the manual.
- Pay attention to the alignment of the adapter plate and ensure that the locking mechanism and lock bolt are mounted opposite to each other.
- Use liquid thread locker for certain screws as indicated in the manual.
- Double-check that all parts and connections are properly installed and tightened.
3. Function Check:
- After installation, ensure that all parts and connections previously removed are properly replaced.
- Verify that no moving parts are obstructed and that the function of the motorcycle is not hindered in any way.
- Check that cables and hoses are not rubbing or pinched.
- Perform a comprehensive check of all functions before riding.
- After the first 50 km and at regular intervals, check the tightening torque of all xxxx connections and the proper fit of the SysBag 30 Bag System.
It is important to note that these instructions are a general guide, and it is recommended to refer to the specific mounting instructions provided with your SW-MOTECH BC.SYS.06.435.20000B SysBag 30 Bag System for detailed and accurate information.
Add New Comment