User Manual Q&AAnswer
Apr 10, 2025 - 12:55 AM
To mount the SW-MOTECH BC.SYS.06.871.20000B SysBag 30 Bag System on your motorcycle, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Preparation:
- Read the mounting instructions carefully and ensure that all parts are included.
- Park your vehicle safely and make sure it cannot fall over.
- Turn off the engine and remove the ignition key.
- Let the motor/exhaust cool off if necessary.
- Disconnect the vehicle battery when working on the electrical system.
- Use appropriate tools and have another person to help you.
2. Mounting:
- All parts and connections removed from the vehicle must be reinstalled in accordance with the vehicle manufacturer's specifications or replaced by parts delivered by SW-MOTECH.
- Secure all threads, unless otherwise specified, with medium-strength liquid thread locker.
- Follow the specific mounting instructions for your type of side carrier (PRO side carriers, EVO side carriers, etc.) as provided in the manual.
- Make sure to tighten all screws and bolts as specified in the parts list.
3. Function Check:
- After installation, ensure that all parts and connections are properly replaced.
- Check that no moving parts are obstructed and that the function of the vehicle is not hindered in any way.
- Cables and hoses must not rub or be pinched.
- Perform a comprehensive check of all functions before riding.
- After the first 50 km and at regular intervals, check the tightening torque of all xxxx connections and the proper fit of the product.
Please note that the above instructions are a general guide. For specific details and illustrations, refer to the SW-MOTECH BC.SYS.06.871.20000B SysBag 30 Bag System Instruction Manual.
Add New Comment