User Manual Q&AAnswer
Apr 10, 2025 - 12:53 AM
To mount the SW-MOTECH SysBag 30 Bag System on your EVO carrier, please follow the steps below:
1. Remove the original screws from the mounting points on your EVO carrier.
2. Attach the mounting brackets (1) and (4) on both sides to the vehicle using the provided screws. Use medium-strength liquid thread locker and do not fully tighten the screws yet.
3. Attach the mounting brackets (9) on both sides to the footrest mounts using the provided screws. Use medium-strength liquid thread locker and do not fully tighten the screws yet.
4. Mount the Crossbar (12) to the license plate holder using the provided screws. Use medium-strength liquid thread locker and do not fully tighten the screws yet.
5. Use the quick-lock fasteners (17) to connect the side carriers (16) to the crossbar (12) and mounting brackets (1), (4), and (9). Secure the fasteners with the lock washers (18).
6. Once all the parts are evenly positioned without excess tension, tighten all the screws as specified in the parts list.
Please note that these instructions are a summary and it is important to refer to the complete instruction manual for detailed information and illustrations. It is also recommended to have the installation carried out by a specialist workshop for your own safety.
Add New Comment