User Manual Q&AAnswer
Apr 10, 2025 - 12:50 AM
To connect your Vivitar V60087BT Wireless Home Theater System to your TV, follow these steps:
1. Make sure your TV has an audio output port. This can be a headphone jack, RCA output, or optical output.
2. Use an appropriate audio cable to connect the audio output port on your TV to the input jack on the rear panel of the subwoofer. The type of cable you need will depend on the audio output port on your TV. For example, if your TV has a headphone jack, you can use a 3.5mm to RCA cable. If your TV has an optical output, you will need an optical cable.
3. Once the audio cable is connected, make sure the AC power cord is plugged into a suitable power outlet.
4. Power on the speaker system by pressing the Power On/Off button on the subwoofer or the remote control.
5. Switch the audio mode to AUX mode by continuously pressing the Mode button on the subwoofer or the Input button on the remote control until AUX mode is activated.
6. Adjust the volume, bass, and treble settings to your preference using the respective knobs on the subwoofer or the remote control.
Your Vivitar V60087BT Wireless Home Theater System should now be connected to your TV and ready to use. Enjoy your enhanced audio experience!
Add New Comment