User Manual Q&AAnswer
Apr 10, 2025 - 12:29 AM
To connect the ENTTEC 71521 Octo LED Pixel Controller to your LED strips or pixel dot systems, follow these steps:
1. Locate the OCTO and the power supply unit (PSU) as close as possible to the first pixel in your chain to reduce voltage drop.
2. Connect the data and clock wires from your LED strips or pixel dot systems to the two 4-universe pixel outputs on the OCTO using suitable connectors.
3. Ensure that the data is flowing from the OCTO to the "Data IN" connection of your LED strips or pixel dot systems.
4. If using multiple OCTO controllers, you can daisy chain them together using the ethernet ports to create an easily extendable network.
5. Power on the OCTO and your LED strips or pixel dot systems.
Note: It is important to refer to the wiring diagrams provided in the user manual for specific instructions on how to connect your LED strips or pixel dot systems to the OCTO controller.
Add New Comment