User Manual Q&AAnswer
Apr 10, 2025 - 12:22 AM
To insert the batteries in the PRAXISDIENST EliteVue Diagnostic Instruments, follow these steps:
1. For battery grips type C and AA with rheotronic® 2.5 V:
a. Turn the battery grip cover anti-clockwise at the lower part of the handle.
b. Insert the standard alkaline batteries into the battery grip with the plus side pointing towards the upper part of the grip.
c. xxxx the battery grip cover firmly back onto the battery grip.
2. For battery grips type C and AA with rheotronic® 3.5 V (for ri-charger® L):
a. Turn the battery grip cover at the lower part of the handle anti-clockwise.
b. Remove the red safety foil on the plus side of the battery during initial start-up.
c. Insert the rechargeable battery approved for your battery grip into the battery grip with the plus side pointing towards the top of the grip.
d. xxxx the battery grip cover firmly back onto the battery grip.
To remove the batteries from the PRAXISDIENST EliteVue Diagnostic Instruments, follow these steps:
1. For battery grips type C and AA with rheotronic® 2.5 V:
a. Turn the battery grip cover on the lower part of the battery grip anti-clockwise.
b. Take the batteries out of the battery grip by holding the opening of the battery grip slightly downwards and shaking if necessary.
c. xxxx the battery grip cover firmly back onto the battery grip.
2. For battery grips type C and AA with rheotronic® 3.5 V (for ri-charger® L):
a. Turn the battery grip cover anti-clockwise on the lower part of the battery grip.
b. Take the battery out of the battery grip by holding the opening of the battery grip slightly downwards and shaking if necessary.
c. xxxx the battery grip cover firmly back onto the battery grip.
Please note that the red safety foil on the plus side of the batteries must be removed before start-up. Also, make sure to follow the specific instructions for each type of battery grip mentioned in the manual.
Add New Comment