User Manual Q&AAnswer
Apr 10, 2025 - 12:08 AM
To insert the battery on the HILTI SID 2A12 Cordless Impact Driver, follow these steps:
1. Make sure the power tool is switched off.
2. Check that the contacts on the battery and the contacts on the product are free of foreign matter.
3. Align the battery with the battery holder on the power tool.
4. Push the battery into the battery holder until it engages with an audible click.
5. Check that the battery is seated securely.
To remove the battery from the HILTI SID 2A12 Cordless Impact Driver, follow these steps:
1. Make sure the power tool is switched off.
2. Press the battery release buttons located on both sides of the battery.
3. While pressing the release buttons, pull the battery out of the tool.
It is important to always remove the battery before carrying out any care and maintenance tasks on the tool. Additionally, when transporting or storing the tool, it is recommended to remove the battery to prevent accidental starting or damage to the battery.
Add New Comment