User Manual Q&AAnswer
Apr 09, 2025 - 11:47 PM
To adjust the outlet pressure of the TOWER Pressure Reducing Valve, please follow these steps:
1. Close all outlets downstream of the valve.
2. Locate the xxxx (A) on the valve body.
3. To reduce the downstream pressure, turn xxxx (A) anti-clockwise.
4. To increase the downstream pressure, turn xxxx (A) clockwise.
Please note that the valve has been factory preset at 3 bar. The setting range for the outlet pressure is between 1 bar and 6 bar.
It is recommended to use the supplied pressure gauge at (B) to show the outlet pressure during adjustment. If needed, you can later remove the gauge and refit the supplied plug, as long as isolation valves have been fitted.
For further assistance or detailed instructions, please refer to the TOWER Pressure Reducing Valve Instruction Manual provided with the product.
Add New Comment