User Manual Q&AAnswer
Apr 09, 2025 - 11:42 PM
To install the Uolfin 4978092 pendant light, please follow the step-by-step instructions provided in the manual. Here is a complete guide on how to install the pendant light:
1. Safety Precautions:
- Before starting any work, turn off the electricity at the main fuse or circuit breaker box.
- Ensure the wall switch is also turned off.
- Make sure the mounting surface is clean, dry, flat, and strong enough to hold the light fixture.
- Verify that the voltage you are using is 120V, and do not exceed the maximum wattage of 40W per bulb.
- Keep the lamp away from acidic and alkaline substances to avoid damaging the surface.
2. Tools Required:
- Before starting the installation, gather the necessary tools as shown in the provided picture.
3. Parts List:
- Familiarize yourself with the different parts included in the package, as listed in the manual.
4. Assembly and Installation:
- Carefully unpack the fixture and ensure all parts and accessories are included.
- Measure and determine the correct number of links needed for the desired hanging height.
- Use chain pliers to disconnect and discard any unwanted parts of the chain.
- Attach quick links to the loops on the canopy and fixture body, and close them securely.
- Thread the fixture wires through the chain, ensuring they are not stressed.
- Turn off the power at the main fuse or circuit breaker box.
5. Installation Steps:
- Unscrew the hex nut and cap nut from the single bar.
- Attach the single bar to the outlet box using the provided mounting screws. Ensure the side marked "GND" faces out.
- If needed, shorten the length of the fixture wires, leaving at least 6" above the single bar.
- Make wire connections according to the provided chart, ensuring the ground wire is connected correctly.
- Twist the wires together with plastic wire connectors and wrap each connector with electrical tape.
- Raise the canopy to the ceiling and secure it in place by tightening the hex nut and cap nut onto the threaded xxxx .
- Place the glass shades on the sockets and secure them with screws.
- Install the bulbs, making sure not to exceed the recommended maximum wattage.
- Double-check that everything is installed properly before turning on the light.
6. Cleaning:
- To clean the fixture, use a soft cloth and avoid abrasive materials or cleaning agents.
7. Ordering Parts:
- If you need to order replacement parts, keep the manual for reference and contact the place of purchase using the provided contact information.
For any further assistance or clarification, please refer to the Uolfin 4978092 pendant light installation manual or contact the company's customer support.
Add New Comment