User Manual Q&AAnswer
Apr 09, 2025 - 11:32 PM
To install the KOBALT 54439 Affix Hooks on a wooden surface, you will need #12 K-Rail screws (item #0103681) as mentioned in the instructions. Here is a step-by-step guide:
1. Start by positioning the hook on the desired location on the wooden surface.
2. Using a drill, create pilot holes for the screws to prevent the wood from splitting.
3. Align the top lip of the hook with the top groove on the backplate and snap it into place.
4. Align the bottom lip of the hook with the bottom groove on the backplate and snap it into place.
5. Once the hook is securely attached, take the #12 K-Rail screws and insert them through the mounting holes on the backplate.
6. Use a screwdriver or drill to tighten the screws, ensuring that the hook is firmly attached to the wooden surface.
Please note that it is important to follow the warning instructions provided in the manual. Always wear eye protection and avoid drilling through electrical wiring during installation. Additionally, disconnect the power source before using tools on electrical boxes or fittings to prevent the risk of electric shock or electrocution.
Add New Comment