User Manual Q&AAnswer
Apr 09, 2025 - 11:57 AM
To connect the Zetronix zSMKDT-II-WF Smoke Detector Battery Camera to your Wi-Fi network, please follow these steps:
1. Make sure you are using a 2.4GHz wireless network, not a 5GHz network.
2. Ensure that the RED LED light on the camera is blinking slowly when powered on. If not, please reset the camera.
3. Position your camera and Wi-Fi router close to each other for a stronger signal.
4. Keep your phone close to the camera during the configuration process.
5. Check the Wi-Fi settings on your smartphone to see if the camera ID matches the one provided on the sticker attached to the device. Do not connect directly from the Wi-Fi settings of your smartphone.
6. Ensure that your Wi-Fi SSID does not contain any symbols or special characters.
7. Charge the camera for up to 24 hours before first-time use.
8. After setting up the camera, go to "Settings" and find "Basic Function Settings" - "Status Indicator" to turn off the LED indicator lights.
For more detailed instructions, please refer to the Zetronix zSMKDT-II-WF Smoke Detector Battery Camera User Manual.
Add New Comment