User Manual Q&AAnswer
Apr 09, 2025 - 11:48 AM
To install the QAZQA 98421 Reena Wood USB Industrial Wall Lamp, please follow the steps outlined in the instruction manual provided with the product. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power supply is turned off to avoid any electrical hazards.
2. Identify the desired location for the wall lamp. Make sure it is near a power outlet and at a suitable height for your needs.
3. Use a stud finder or a similar tool to locate the studs in the wall. It is recommended to mount the lamp on a stud for stability.
4. Once you have identified the stud, mark the desired position for the lamp on the wall using a pencil or a marker.
5. Take the mounting plate provided with the lamp and align it with the marked position on the wall. Use a level to ensure that it is straight.
6. Using a drill, create pilot holes for the screws that will secure the mounting plate to the wall. The size of the pilot holes should match the size of the screws provided.
7. Attach the mounting plate to the wall using the screws and a screwdriver or a drill. Make sure it is securely fastened.
8. Take the lamp body and connect the USB cable to the USB port on the back of the lamp. Ensure that the cable is not twisted or tangled.
9. Align the lamp body with the mounting plate and slide it onto the plate until it locks into place. You may need to apply some pressure to secure it properly.
10. Once the lamp is securely attached to the mounting plate, turn on the power supply and test the lamp to ensure it is functioning correctly.
11. Adjust the lamp's position and angle as desired to achieve the desired lighting effect.
Please note that this is a general guide, and it is essential to refer to the specific instructions provided in the QAZQA 98421 Reena Wood USB Industrial Wall Lamp instruction manual for accurate and detailed installation steps.
Add New Comment