User Manual Q&AAnswer
Apr 09, 2025 - 11:41 AM
To install the Lindby GU10 LED Light Bulb, please follow these steps:
1. Unpack the product carefully and check that it is complete and intact. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address mentioned in the manual if there is any damage.
2. Before installation, read through the instruction manual carefully to avoid errors that could lead to hazards or malfunctions. Keep the instructions for future reference and pass them on to subsequent owners or users of the product.
3. Comply with the national installation and safety regulations for the installation, operation, and maintenance of the light bulb. Always observe the symbols on the packaging and in the installation instructions.
4. It is recommended to have a trained electrician connect the electricity supply. Never work on the light if a voltage is applied as it can be dangerous.
5. Ensure that the light bulb is not installed on normally flammable surfaces. It should only be installed on non-combustible surfaces.
6. Pay attention to the smallest distance to illuminated areas, as indicated in the installation sketch provided in the manual.
7. The light bulb is not suitable for covering with thermal insulation materials.
8. Avoid exposing the light bulb to large mechanical loads, stresses, or heavy soiling. Changing or modifying the product is not recommended for safety reasons.
9. Before cleaning or maintenance work, make sure the light bulb is cooled and disconnected from the power supply. Use a dry or lightly moistened cloth for regular cleaning and avoid using chemicals or abrasive cleaners.
10. When disposing of the light bulb, do not throw it in normal household waste. Instead, hand it in to a collection point for the recycling of large electrical and electronic appliances. Follow the relevant provisions for the separate collection of waste electrical and electronic equipment (WEEE) in your country.
Please note that this answer is based on the information provided in the Lindby GU10 LED Light Bulb instruction manual. For specific installation details or any further questions, it is recommended to refer to the manual or contact the service address provided.
Add New Comment