How do I install the Lindby LED Wand Lamp? (Lindby LED Wand Lamp Instruction Manual)

Answer

manuals.plus

Apr 09, 2025 - 11:39 AM

To install the Lindby LED Wand Lamp, please follow these steps:

1. Carefully unpack the product and ensure that all parts are complete and undamaged. Do not use the lamp if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.

2. Familiarize yourself with the installation instructions provided in the manual. It is important to read and understand the instructions to avoid any hazards or malfunctions.

3. Comply with the national installation and safety regulations for the installation, operation, and maintenance of the lamp. Always follow the symbols and warnings indicated on the packaging and in the installation instructions.

4. It is recommended to have a trained electrician connect the electricity supply. Never work on the lamp if a voltage is applied. This can be dangerous and potentially lead to electric shock or death.

5. Ensure that the lamp is installed on a non-combustible surface. It is not suitable for direct installation on normally flammable surfaces.

6. Pay attention to the smallest distance to illuminated areas, as indicated in the installation sketch provided in the manual.

7. Do not cover the lamp with thermal insulation materials, as it is not suitable for such use.

8. Avoid exposing the lamp to large mechanical loads, stresses, or heavy soiling. This can damage the product and pose hazards such as short-circuits, electric shock, or fire.

For any further questions or concerns, refer to the complete Lindby LED Wand Lamp Instruction Manual or contact the service address provided in the manual.