User Manual Q&AAnswer
Apr 09, 2025 - 11:38 AM
To connect the Power Dynamics PDA-B500 amplifier to your speakers, follow these steps:
1. Make sure the amplifier is turned off before wiring the system.
2. Choose the appropriate size of wire based on the distance between the amplifier and speakers. Refer to the "Distance/Wire Size" guidelines in the manual.
3. Connect the speakers using either speaker NL4 plugs or bare wire for the binding post output connectors on the rear panel of the amplifier.
4. Ensure that you connect the positive (+) output of the amplifier to the corresponding positive (+) terminal on the speaker, and the negative (-) output to the corresponding negative (-) terminal on the speaker.
5. Repeat the above step for all speakers you want to connect.
6. Once all connections are made, double-check that they are secure and properly connected.
7. Turn on the amplifier and adjust the volume controls as needed.
Note: Never connect a hot (+) output to ground or (-) output, and never connect the hot (+) to other hot outputs.
For more detailed information and illustrations, please refer to the "Connecting Output" section on the rear panel features page in the Power Dynamics PDA-B500 instruction manual.
Add New Comment