User Manual Q&AAnswer
Apr 09, 2025 - 11:22 AM
To change the saw blade on the Einhell TE-CS 18-150 Li Li - Solo Hand-Held Circular Saw, follow these steps:
1. Always remove the battery pack before making any adjustments to the equipment.
2. Press the spindle lock located on the saw to lock the blade in place.
3. Use the saw blade wrench provided to loosen the xxxx that secures the saw blade.
4. Push back and secure the moving swing guard hood using the lever for the swing guard hood.
5. Remove the flange and the old saw blade in a downward direction.
6. Clean the flange and insert the new saw blade, making sure to pay attention to the running direction indicated by the arrow on the guard hood and saw blade.
7. For a 10 mm blade holder, place the flange on the blade with the flat side against the blade. For a 16 mm blade holder, place the flange on the blade with the raised side against the blade. Ensure that the flange is correctly positioned.
8. Tighten the xxxx to secure the saw blade, making sure it runs true.
9. Before pressing the ON/OFF switch, ensure that the saw blade is correctly fitted and that all moving parts run smoothly and that the clamping screws are tightened securely.
Please refer to the instruction manual for more detailed information and illustrations on changing the saw blade.
Add New Comment