User Manual Q&AAnswer
Apr 09, 2025 - 11:12 AM
To install and set up the resideo Honeywell Home PROSIX Indoor Siren, please follow the steps outlined in the provided Installation Instructions. Here is a general overview of the process:
1. Start by scanning the QR code on the device or refer to the R800-26482 Installation Instructions for detailed guidance.
2. Ensure that you have the necessary tools and equipment for installation, such as a screwdriver.
3. Choose a suitable location for mounting the siren indoors. It should be easily visible and audible in case of an alarm.
4. Open the device's cover by removing the screws, and then remove the battery tab to power it on.
5. Follow the instructions to enroll the siren into your security system or control panel. This may involve entering programming mode on your panel and activating the siren's enrollment mode.
6. Once enrolled, secure the siren to the desired location using the provided screws or mounting bracket.
7. Test the siren by triggering an alarm or performing a system test. Ensure that the siren produces the desired sound and strobe effect.
For more detailed instructions and specific information regarding the resideo Honeywell Home PROSIX Indoor Siren, please refer to the provided Installation Instructions (R800-26482).
Add New Comment