How do I install the Lindby 1 Light Metal - H: 16.2 cm Wall Lamp? (Lindby Light Metal Wall Lamp Instruction Manual)

Answer

manuals.plus

Apr 09, 2025 - 11:08 AM

To install the Lindby 1 Light Metal - H: 16.2 cm Wall Lamp, please follow these steps:

1. Carefully unpack the product and check that it is complete and undamaged. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.

2. Read through the installation instructions carefully to avoid any errors or hazards.

3. Ensure that you comply with the national installation and safety regulations for the installation, operation, and maintenance of the wall lamp.

4. The installation sketch on page 9 of the manual provides further information on the intended use and installation requirements. Pay attention to the smallest distance to illuminated areas, as well as the suitability of the lamp for installation on non-combustible surfaces and not covering it with thermal insulation materials.

5. It is recommended to have a trained electrician connect the electricity supply. Do not work on the light if a voltage is applied. Always follow the general safety instructions and warnings.

6. Do not expose the light to large mechanical loads, stresses, or heavy soiling. Changing or modifying the product is not recommended for safety reasons.

7. Before starting any cleaning or maintenance work, ensure that the light is cooled and disconnected from the power supply. Check that no voltage is present. For regular cleaning, use a dry or lightly moistened cloth. Avoid using chemicals or abrasive cleaner/scouring agents.

Please refer to the complete instruction manual for any additional information or specific details related to the installation and usage of the Lindby 1 Light Metal - H: 16.2 cm Wall Lamp.