User Manual Q&AAnswer
Apr 09, 2025 - 10:41 AM
To connect the Y-splitters and extension wires for the OPT7 Aura Double Row Snowmobile installation, follow these steps:
1. Determine the desired location for the Y-splitters and ensure that the wiring has enough length to reach the control box.
2. Connect the Y-splitters to the main power harness. The Y-splitters allow you to split the power and control signal to multiple light strips.
3. Connect the extension wires to the other end of the Y-splitters. The extension wires are used to extend the length between the Y-splitters and the light strips.
4. Connect the light strips to the extension wires. Ensure that the connectors are securely plugged in.
5. Use zip ties to secure the wiring and keep it away from any moving components. This will help prevent any damage to the wiring.
6. It is important to note that the LED connectors are not waterproof. To ensure the longevity of the lighting kit, use heat shrink tube or electrical tape around the LED connectors to provide waterproofing.
By following these steps, you will be able to properly connect the Y-splitters and extension wires for your OPT7 Aura Double Row Snowmobile installation.
Add New Comment