User Manual Q&AAnswer
Apr 09, 2025 - 09:47 AM
To install the Lindby 1Light Outdoor Wall Lamp with Sensor, please follow these steps:
1. Carefully unpack the product and ensure that it is complete and undamaged. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.
2. Familiarize yourself with the installation instructions provided in the manual. Read them carefully to avoid any errors or hazards during installation.
3. Comply with the national installation and safety regulations for the installation, operation, and maintenance of the light. Always refer to the symbols on the packaging and in the installation instructions for guidance.
4. It is recommended to have a trained electrician connect the electricity supply. Never work on the light if there is voltage applied. This is extremely dangerous and can result in death.
5. Ensure that the light is installed on a non-combustible surface. It is not suitable for direct installation on normally flammable surfaces.
6. Follow the installation sketch provided in the manual, which indicates the smallest distance to illuminated areas.
7. Do not cover the lights with thermal insulation materials.
8. Avoid exposing the light to large mechanical loads, stresses, or heavy soiling. This can damage the product and pose hazards such as short-circuits, electric shock, or fire.
9. Once installed, the light should be regularly cleaned and maintained. Before performing any cleaning or maintenance work, ensure that the light is cooled and disconnected from the power supply. Use a dry or lightly moistened cloth for cleaning and avoid using chemicals or abrasive cleaners.
Please note that this answer is a summary of the installation instructions provided in the manual. For detailed and specific instructions, refer to the Lindby 1Light Outdoor Wall Lamp with Sensor Instruction Manual.
Add New Comment