User Manual Q&AAnswer
Apr 09, 2025 - 09:43 AM
To connect the tronios ODS40 Series Speaker Set to your audio system, follow the connection diagram provided in the manual. Ensure that you have the necessary cables and connectors.
1. Identify the audio output on your audio system. This could be a headphone jack, RCA output, or speaker wire terminals.
2. Connect one end of the appropriate cable to the audio output of your audio system. For example, if your audio system has RCA outputs, use RCA cables.
3. Connect the other end of the cable to the corresponding input on the tronios ODS40 Series Speaker Set. The manual does not specify the exact inputs, so refer to the back panel of the speakers for labeled inputs.
4. Repeat the process for the second speaker if you have a stereo setup.
5. Once the speakers are connected, ensure that the power is turned off on both the audio system and the speakers.
6. Plug in the power cord of the tronios ODS40 Series Speaker Set to a suitable power outlet.
7. Turn on your audio system and adjust the volume to a low level.
8. Turn on the tronios ODS40 Series Speaker Set and gradually increase the volume to your desired level.
Note: It is important to use the appropriate cables and connectors for your specific audio system. If you are unsure about the connections or need further assistance, it is recommended to consult a qualified technician or contact Tronios customer support for guidance.
Add New Comment