User Manual Q&AAnswer
Apr 09, 2025 - 09:27 AM
To connect the Spider M1 Infinite Y-axis Laser Engraver to a wireless network for operation, you can follow the steps below:
1. Make sure you are in a wireless environment and have a PC or mobile phone connected to the same local area network as the engraver.
2. On the engraver's standby interface, click on "Settings" to access the Wi-Fi settings.
3. In the Wi-Fi settings page, select the available Wi-Fi network and enter the password to connect to it.
4. Once connected, note down the IP address shown on the engraver's screen.
5. Download the MKS Laser app from the Apple App Store or Google Play on your mobile phone.
6. Open the MKS Laser app and enter the IP address of the engraver that you noted down earlier. Make sure your mobile phone and the engraver are still on the same Wi-Fi network.
7. Click on "Connect" in the upper left corner of the app and enter the device IP. Then return to the home page.
8. Set the engraving parameters and position according to your requirements.
9. Start the engraving process. You can exit the app on your mobile phone or connect it to the terminal without affecting the engraving.
Please note that these instructions are based on the information provided in the user manual for the Spider M1 Infinite Y-axis Laser Engraver. For more detailed instructions and troubleshooting tips, please refer to the manual or contact the manufacturer's customer support via the provided email or website.
Add New Comment