User Manual Q&AAnswer
Apr 09, 2025 - 08:55 AM
The MARQUARDT CD1 UHF Transmitter is a wireless seat buckle sensor designed for use in cars. Here is a step-by-step guide on how to install and use the transmitter:
1. Installation:
a. Locate the seat buckle in your car where you want to install the transmitter.
b. Ensure that the area around the seat buckle is clean and free from any debris.
c. Peel off the adhesive backing from the transmitter and firmly press it onto the seat buckle.
d. Make sure the transmitter is securely attached to the seat buckle.
2. Usage:
a. Once the transmitter is installed, it will wirelessly transmit signals to the receiver unit.
b. The receiver unit is typically located in the car's central control system.
c. The transmitter will detect whether the seat belt is fastened or not and send this information to the receiver.
d. The receiver unit will then process this information and provide appropriate feedback or warnings to the driver.
It is important to note that any changes or modifications to the transmitter that are not expressly approved by the responsible party for compliance may void the user's authority to operate the equipment. Additionally, the device complies with Part 15 of the FCC Rules and should not cause harmful interference or be affected by interference from other devices.
For further information or specific instructions, please refer to the owner's manual of your car or contact MARQUARDT directly through the provided contact details.
Add New Comment