User Manual Q&AAnswer
Apr 09, 2025 - 08:54 AM
To mount the Teufel AC 3500 SM Speaker Wall Mount, please follow these steps:
1. Remove the cover from the base plate.
2. Hold the base plate against the wall at the desired location and mark the four drill holes horizontally.
3. Drill holes with a diameter of 6 mm in the wall at the marked positions.
4. Insert four masonry plugs in the drill holes.
5. Run the speaker cable through the holes in the base plate from below.
6. xxxx the base plate on the wall using four half round head screws.
7. Run the upper end of the speaker cable through the hole in the cover.
8. Put the cover on the base plate, making sure the speaker cable is run through the notches on the front and bottom side.
9. Insert the bracket in the base plate and xxxx tighten it using two screws. If necessary, the speaker can be horizontally aligned with the listening position later by loosening these screws.
10. If necessary, loosen the xxxx and change the inclination of the bracket.
11. Attach the speaker to the bracket. For speakers with a keyhole on the rear panel, insert the retaining bolt in the bracket from the front and xxxx it in place loosely using the nut. Carefully hang up the speaker on the retaining bolt and xxxx tighten it using the nut. For speakers with an M6 thread on the rear panel, xxxx tighten the speaker on the bracket using the xxxx .
Please refer to the Teufel AC 3500 SM Speaker Wall Mount instruction manual for more detailed instructions and illustrations.
Add New Comment