User Manual Q&AAnswer
Apr 09, 2025 - 08:51 AM
To install the Lindby GU10 Wall Lamp 1 Light Plaster Metal, please follow these steps:
1. Carefully unpack the product and ensure that it is complete and undamaged. Do not use the light if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if there is any damage.
2. Read through the installation instructions carefully to avoid any errors or hazards during installation. Keep the instructions for future reference and pass them on to subsequent owners or users of the product.
3. Comply with the national installation and safety regulations for the installation, operation, and maintenance of the wall lamp. Always refer to the symbols on the packaging and in the installation instructions for safety instructions and warnings.
4. It is recommended to have a trained electrician connect the electricity supply. Do not work on the light if a voltage is applied, as there is a risk of electric shock.
5. Ensure that the smallest distance to illuminated areas is maintained as indicated in the installation sketch. The wall lamp is not suitable for covering with thermal insulation materials or direct installation on normally flammable surfaces.
6. The intended use of the wall lamp is for lighting purposes only. Do not subject the light to large mechanical loads, stresses, or heavy soiling. Any use other than intended can damage the product and pose hazards such as short-circuits, electric shock, or fire.
7. Before cleaning or performing maintenance, ensure that the light is cooled and disconnected from the power supply. Use a dry or lightly moistened cloth for regular cleaning and avoid using chemicals or abrasive cleaners.
8. When disposing of the wall lamp, do not throw it in normal household waste. Instead, hand it in to a collection point for the recycling of large electrical and electronic appliances. Follow the relevant provisions for the separate collection of waste electrical and electronic equipment (WEEE) in your country.
9. The Lindby GU10 Wall Lamp 1 Light Plaster Metal is designed, produced, and tested in conformity with EN 60598 and fulfills the safety requirements of EU Directives 2014/35/EU and 2014/30/EU. The complete declaration of conformity is available at the service address provided in the manual: LUQOM Holding GmbH, Seelbüde 13, D-36110 Schlitz, 020 3514 3658, info@luqom.eu.
Add New Comment